PARTICAL BOARD EQUIPMENT:SANDING MACHINE

1.customer can choose 2.manufactured by expert engineer. 3.low price but high quality. 4.necessary parts of partical board

Detailed Product Description

 

1. heavy duty type 2. four-head wide belt sander 3. double-side sanding machine.

Technical Parameter:
Working width mm	600~1300
Working thickness mm	3~100
Working Length mm	≥1000
Working Precision mm	±0.1
Motor Power of Abrasive Belt kW	90×2
Speed of Abrasive Belt m/s	30
Abrasive Belt SizeL×D mm	2800×1350
Auto-feeding System:stepless speed shiftm/min	6~35
Motor Power of Auto-feeding systemkW	15
Motor power of hydraulic lifting system KW	4
Total PowerkW	200.5
Working Pressure MPa	0.5~0.8
Compressed Air Consumption m³/min	1.1
System Scheme:
steel contact roller sanding system:	2
Electronic digital-display system for working thickness	1
Dynamic Photoelectrical Tracing System of Abrasive belt	2
Movement Limit and Protection System for machine body lifting	1
Emergent Brake and Safeguarding System	1
Breakage Protection System of Abrasive Belt	2
Press working-piece System	8
Dust-Collection Air Speed20~30m/s, Dust-Collection Air Volumem3/h	35000

 

Detailed Product Description

 

Complete set of Particle board machinery with various kinds of capacity.

Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and  decoration and lamination.

 

1. Chip preparation section      Raw material is reduced into qualified chips by the drum chipper,  then the chips are transported to the chip bin, and then feed to the  knife-ring flaker by which the chips are turned to flakes, then the  flake stored in wet flake bin.

 

2. Drying and sifting section     The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

 

3. Glue regulating and applying section      After scaled, the core and surface flakes are to be effectively  and uniformly mixed with qualified glue independently in their glue mixers respectively.

 

4. Forming and hot-pressing section     The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.

 

 5.Cooling and sizing section     The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become  a qualified particle-board, stacked on the hydraulic lift.

 

6. Sanding Section      The board are sanded, checked and stored       PLC control is used in mat-forming section.

PARTICAL BOARD EQUIPMENT:SANDING MACHINE