- Wood Based Panels Machinery[10]
- Press[5]
- Other Machinery[1]
- Veneers[7]
- Contact Person : Mr. Gao Bruce
- Company Name : Shandong Huate Machinery Manufacturing Co., Ltd.
- Tel : 86-0539-8561234
- Fax : 86-0539-8561234
- Address : Shandong,Linyi,North Shabu Village Lanshan Office Linyi City
- Country/Region : China
- Zip : 276013
plywood machine:hot press/cold press/sanding machine/peeling machine/bolier
The machine can make plywood,paricle board,chip board, fibreboard,decorative sheet,etc.
15Layers400T Hot-press(composite frame model)
Quantity and Diameter of Cylinder | 2 units ¢320mm(Wuxi,Alloyed material) |
Stroke of Cylinder | 1050mm |
Noloade closing time | About 27S |
Hydraulic systerm | Manully /Automatic controlled |
Hydraulic systerm compression resitance | 25MPa |
Main motor | 11KW |
Presurized moto | 5.5KW |
Main pump | Shanghai Aviation 250 pump(Made by Japan -Technic) |
Presurized pump | 10ml/rev plunger pump |
Integral qulity drilling board | 2700×1370×42mm(Produced in Kunshan) |
Separation between layers | 80MM |
Width of plate main frame | 35,22,12mm |
Width of Upper, Bottom crossbeam | 1000,1000mm |
Demensions of Main frame(4 parts, available for packing) | 3560×1370×4280mm |
1.Vertical pillar(2 units) | 4280×770×400mm |
2.Upper crossbeam(1 units) | 3560×900×1370mm |
3.Bottom crossbeam(1 units) | 3560×900×770mm |
NOTES:
1.WEIGHT: 33T
2. This equipment used to produce construction moulding board, hipboard ,multiple-layers veneer ,which are under 20mm.
400T Prepress(standard frame model)
Quantity of Cylinder | 3 units |
Diameter of Cylinder | 320mm(Anti-scrape, Alloyed material) |
Clinder stroke | 800mm |
Production place of Cylinder | Wuxi |
Hydraulic systerm pressure | 25MPa |
Main motor | 7.5kw |
Presurized motor | 5.5kw |
Main pump | 100:100 double connection lamina fule pump |
Presurized fule pump | 10ml/rev plunger pump |
Demensions of Main frame | 3600×1370×4100mm |
Width of plate main frame use | 30mm,22mm,12mm |
Movable crossbeam | 2700×1370×400mm |
Width of movable crossbeam | 22mm |
Distance between upper crossbeam and movable crossbeam | 1800mm |
Sander
Working width | 40-1300mm |
Working thickness | 2.5-120mm |
Working length | ≥630mm |
1# abrasive belt speed | 19m/S |
2# abrasive belt speed | 18m/S |
Feeding speed | 6-30m/min |
Dimensions of Abrasive belt | 1330×2200mm |
Power | 63.74kw |
Working air pressure | 0.55MPa |
Input air of Dust suction | 9500m3/h |
Wind speed of Dust suction | 25-30m/S |
Overall Dimensions | 2260×2680×2040mm |
Hydraulic elevator platform(lifter)
Motor power | 3kw |
Height of Lifting | 1800mm |
Overall Dimensions | 2300×1200×600mm |
Main Parameters for WWXQ130F no-card veneer peeling lathe
1. Specification of wood (D* L)(mm) Φ300×1300
2. Minimum diameter of leaving shaft (mm) Φ30
3. Maximum stroke of knife (mm) 320
4. peeling thickness(mm) 0.4~3.6
5. Peeling knife specifications (L * W * T)(mm) 1400×130×12.7
6. Rolling curve speed (m / min) 26
7. Motor and power Twin-roller motor 7.5KW
Single-roller motor 4KW
Fast-forward rewind motor 1.1KW
8. Overall dimension(L*W*H)(mm) 2800×2050×1180
Main Parameters for WWXQ260 no-card veneer peeling lathe
1. Specification of wood (D* L)(mm) Φ300×2600
2. Minimum diameter of leaving shaft (mm) Φ30
3.Maximum stroke of knife (mm) 300
4. peeling thickness(mm) 0.3~2.6
5. Peeling knife specifications (L * W * T)(mm) 2700×140×12.7
6. Rolling curve speed (m / min) 21
7. Motor and power Twin-roller motor 11KW
Single-roller motor 4KW
Fast-forward rewind motor 1.5KW
8. Overall dimension(L*W*H)(mm) 4450×2050×1300
plywood machine:hot press/cold press/sanding machine/peeling machine/bolier
